PROFILE DETAILS
Dr. Bodius Salam
Professor
Field of Interest
Heat transfer, Renewable Energy.
Qualification
BSc Eng (Mech)(BUET), M Eng (Malaysia), PhD (Edinburgh), FIEB, MBSME.
Publications
| Serial No | Title | Authors | Informations | Year |
|---|---|---|---|---|
| 1 | Design and fabrication of a heat pipe using refrigerant R-134a as working fluid | M. Z. Isalm, M. Al-Mamun and B. Salam | International Journal of Engineering Trends and Technology, Vol. 49(6), pp. 415-418 | 2017 |
| 2 | Analysis of a vertical heat pipe for free and forced convection using refrigerant R-22 as working fluid | M. Z. Isalm and B. Salam | International Journal of Engineering Research & Technology, Vol. 6(7), pp. 502-504 | 2017 |
| 3 | Production of biogas from anaerobic digestion of poultry droppings and domestic waste using catalytic effect of silica gel | J. U. Ahamed, M. F. Raiyan, Md. S. Hossain, M. M. Rahman and B. Salam | International Journal of Automotive and Mechanical Engineering, Vol. 13(2), pp. 3503-3517 | 2016 |
| 4 | Biogas from mesophilic anaerobic digestion of cow dung using kaolin as an additive | M. L. Ali, B. Salam and S M F Shakil | Journal of Modern Science and Technology, Vol. 4(1), pp. 128-134 | 2016 |
| 5 | Biogas from mesophilic anaerobic digestion of cow dung using silica gel as catalyst | B. Salam, S. Biswas and M. S. Rabbi | Procedia Engineering, Vol 105, pp. 652-657 | 2015 |
| 6 | Performance of turbulent flow heat transfer through a tube with perforated strip inserts | M. M. K. Bhuiya, J. U. Ahamed, M. A. R. Sarker, B. Salam, A. S. Sayem and A. Rahman | Heat Transfer Engineering, Vol. 35(1), pp. 43-52 | 2014 |
| 7 | Experimental investigation of tube side heat transfer enhancement using wire coil insert | S. Biswas and B. Salam | Mech. Eng. Res. Journal, 9, pp. 18-23 | 2013 |
| 8 | Renewable hydrogen from aqueous phase reforming (APR) of glycerol | M. M. Rahman, R. K. Opu and B. Salam | Mech. Eng. Res. Journal, 9, pp. 66-71 | 2013 |
| 9 | Heat transfer enhancement in a tube using rectangular-cut twisted tape insert | B. Salam, S. Biswas, S. Saha and M. M. K. Bhuiya | Procedia Engineering, Vol. 56, pp. 96-103 | 2013 |
| 10 | Experimental investigation of tube side heat transfer enhancement using segmented cross-strip insert | S. Biswas, B. Salam and M. M. K. Bhuiya | Mech. Eng. Res. Journal, 8, pp. 32-37 | 2012 |
| 11 | Heat transfer and pressure drop characteristics in turbulent flow through a tube | M. M. K. Bhuiya, J. U. Ahamed, M. A. R. Sarker, B. Salam, H. H. Masjuki and M. A. Kalam, R. Saidur and A. S. Sayem | Experimental Heat Transfer, Vol. 25, pp. 301-322 | 2012 |
| 12 | Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts | M. M. K. Bhuiya, J. U. Ahamed, M. S. U. Chowdhury, M. A. R. Sarker, B. Salam, R. Saidur, H. H. Masjuki and M. A. Kalam | Intl. Communications in Heat and Mass Transfer, Vol. 39, pp. 94-101 | 2012 |
| 13 | Effect of adjacent tubes on pressure distributions around a horizontal tube | S. Biswas, B. Salam, M. Islam and M. M. K. Bhuiya | Mech. Eng. Res. Journal, 7, pp. 3-11 | 2010 |
| 14 | Quantification of errors in the Wilson plot applied to condensation on the outside of tubes | B. M. Burnside, B. Salam and D. A. McNeil | Journal of Mechanical Engineering, Transaction of Mech. Eng. Div., IEB, Vol. ME41, No. 1, pp. 31-41 | 2010 |
| 15 | Forced convection film condensation on a horizontal tube with variable properties | B. Salam, D. A. McNeil, B. M. Burnside and S. Biswas | Journal of Mechanical Engineering, Transaction of Mech. Eng. Div., IEB, Vol. ME40, No. 2, pp. 79-89 | 2009 |
| 16 | Pressure drop measurements in a low pressure steam condenser with a horizontal bundle of staggered tubes | B. Salam, D. A. McNeil and B. M. Burnside | Applied Thermal Engineering, 24, pp. 1365-1379 | 2004 |