PROFILE DETAILS
gmsislam@cuet.ac.bd
Cement Chemistry; Durability of concrete structures; Corrosion monitoring of reinforced concrete in the marine environment; Sustainable concrete construction; Applications of fibre reinforcement in concrete; Structural retrofitting and strengthening and Porous concrete.
a) PhD in Concrete and Construction, University of Dundee, United Kingdom;
b) M. Engg. in Built Environment, Hokkaido University, Japan; and
c) B. Sc. in Civil Engineering, (CUET).
------------------------------------------------------------------------
Courses Conduced
Undergraduate Courses:
1. Prestressed Concrete (Level-4, Term-II);
2. Design of Concrete Structures - II (Level-3, Term-II);
3. Design of Concrete Structures - I (Level 3, Term-I);
4. Mechanics of Materials - II (Level-2, Term-II);
5. Design of Concrete Structure (Sessional) (Level-3, Term-II);
6. Engineering Materials (Sessional) (Level-2, Term-I);
7. Civil Engineering Drawing (Level-1, Term-I).
Post Graduate Courses:
1. Advanced Concrete Technology
2. Life Cycle of Structures
3. Advanced Design of Concrete Structures
Post Graduate Degree Supervised:
1. Muhammad Tanveer Rahian (2023) Properties of Roller Compacted Concrete Using Steel Slag (SS) Aggregate. Master of Engineering Thesis. Department of Civil Engineering, CUET. (Upcoming)
2. Nusrath Jaha (2022) Ionizing radiation protection efficiency of common mortar and concrete used for infrastructure construction in Bangladesh. Master of Engineering Thesis. Department of Civil Engineering, CUET.
3. Goutam Barua (2022). Improving the performance of environment-friendly permeable concrete using polypropylene fiber. MSc Engineering in Disaster and Environmental Engineering Thesis. Department of DEM, CUET.
4. Md. Mamun Hossain (2021) Eco-friendly use of waste pumice in mortar and concrete. MSc Engineering Thesis. Department of Civil Engineering, CUET.
5. Iffat Sultana (2021). A Study on the Cementitious Properties of Ladle Slag in Concrete. Master of Science in Civil Engineering Thesis. Department of Civil Engineering, CUET.
6. Sabrina Islam (2020). An Experimental Study on the Behaviour of Slag Blended Concrete in Acidic Environment. Master of Engineering Thesis. Department of Civil Engineering, CUET.
7. Jonayed Kaiser Sourav (2019) Properties of Green Concrete using Waste Ceramic. Master of Engineering Thesis, Department of Civil Engineering, CUET.
8. S. M. Asaduzzaman (2018) A Study on the Properties of Jute Fiber Reinforced Concrete. Master of Engineering Thesis, Department of Civil Engineering, CUET.
9. Niaz Mohammad Mamun (2016) Flexural Capacity Assessment of Brick Chips RC Beam Reinforced with Carbon Fiber Polymer. MSc Thesis, Department of Disaster and Environmental Engineering, CUET (Co-supervisor).
BEST PAPER AWARDS:
§ Best Paper Award in Structural Engineering Category in the 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022), 10-12 February, 2022, KUET, Khulna, Bangladesh for the research paper titled "Service life and environmental performance simulation of concrete structure using SCMs as partial replacement of OPC."
§ Best Paper Award in Structural Engineering Category in the 5th International Conference on Advances in Civil Engineering (ICACE 2021), 4-6 March, 2021, CUET, Chattogram, Bangladesh for the research paper titled "Slag and Silica Fume based Geopolymer Mortar using Locally Available Waste Filler Materials"
§ Best Paper Award in Structural Engineering Category in the 5th International Conference on Civil Engineering for Sustainable Development (ICCESD 2020), 7-9 February, 2020, KUET, Khulna, Bangladesh for the research paper titled "Non-fired Building Block Using Industrial Wastes"
RESEARCH GRANTS:
§ Optimization of ternary combined geopolymer using artificial neural network (ANN) - from University Grants Commission of Bangladesh – 2022.
§ Geopolymer using brick-based recycled mixed demolition waste - from University Grants Commission of Bangladesh – 2022.
§ Appraisal of Heavy Metal Leaching from Waste Materials Building Blocks from University Grants Commission of Bangladesh – 2022.
§ Field Trial of Clay Free Unfired Brick - introducing a clean brick manufacturing in Bangladesh from Research England, United Kingdom – 2021.
§ Ionizing Radiation Shielding Effectiveness of Common Mortar and Concrete used for Construction in Bangladesh - from University Grants Commission of Bangladesh – 2021.
§ Development of non-fired brick replacing agricultural clay by alternative material - from Research England, United Kingdom – 2019.
§ Application of Waste Plastic Bottle as a Sustainable Low-cost Housing Material for Bangladesh - from University Grants Commission of Bangladesh – 2018.
§ Durable Concrete Design Guidelines for Bangladesh using Chloride Mapping- from University Grants Commission of Bangladesh – 2018.
§ Comparative analysis of strength and thermal insulation properties of fiber reinforced mud blocks as wall material - from University Grants Commission of Bangladesh – 2017.
§ Waste Tiles/Ceramic Product for Making Green
Concrete- from University Grants Commission of Bangladesh – 2017.
§ Behavior of Reinforce Concrete Beams Strengthened
with CFRP Materials - from University Grants Commission of Bangladesh – 2014.
§ Evaluating Glass Product as a Supplementary
Cementitious Material from University Grants Commission of Bangladesh – 2013.
Serial No | Title | Authors | Informations | Year |
---|---|---|---|---|
1 | Evaluating Potential Use of Ladle Furnace Slag as Supplementary Cementitious Material in Concrete: Case Study from Extensive Laboratory Works | Sultana, I and Islam, G M S | Case Studies in Construction Materials. Vol. 18, e02141, DOI: https://doi.org/10.1016/j.cscm.2023.e02141 | 2023 |
2 | Appraisal of Heavy Metal Leaching from Waste Materials Building Block | Hossen, M A and Islam, G M S | Submitted | 2022 |
3 | Turning wastes into building materials: application of waste plastic bottle as a sustainable low-cost housing material for Bangladesh | Rahman, Tazia; Islam, G. M. Sadiqul; Aich, Pratap; Kanu, Kumar Das; Sultana ,Zakia | Under Review | 2023 |
4 | Using Jute Fiber to Improve Fresh and Hardened Properties of Concrete | S M Asaduzzaman and G M Sadiqul Islam | Journal of Natural Fibers, Vol. 20, No. 2, Article No. 2204452, DOI: 10.1080/15440478.2023.2204452 | 2023 |
5 | Service life and environmental performance simulation of concrete structure using SCMs as partial replacement of OPC | G. M. S. Islam, I. Jahan, M. M. Hameem, T. Mahmud, J. Abdullah, M. M. Ishmum and M. Alam | American Institute of Physics (AIP) Conference Proceedings, Vol. 2713, Issue 1 28, April 2023; 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022), 10~12 February 2022, KUET, Khulna, Bangladesh. https://doi.org/10.1063/5.0130166 (Best Paper Award in Structural Engineering) | 2023 |
6 | Efficacy of Bacillus Cereus Bacteria in Improving Concrete Properties through Bio-precipitation | Priyom, S N, Islam, M M, Islam, G M S, Islam, M S, Rahman, M A, Zawad, MFS and Shumi W | Iranian Journal of Science and Technology, Transactions of Civil Engineering, pp. 1-12, https://doi.org/10.1007/s40996-023-01181-z | 2023 |
7 | Use of silicon industry waste for self-compacting concrete | G M Sadiqul Islam, Suraiya Akter and Tabassum Binte Reza | 8th International Conference on “Integrated Solid Waste & Faecal Sludge Management, Khulna University of Engineering & Technology, 25-27 February, 2023, Paper ID: 078. | 2023 |
8 | Ionizing Radiation Shielding Efficiency of Concrete with Steel Industry Wastes | Islam, G M S; Walid, F B and Ferdous, J | International Conference on Engineering Research, Innovation and Education School of Applied sciences & Technology, SUST, Sylhet, 12-14 January, 2023, Paper ID: 210, Part B, pp. 461-66. | 2023 |
9 | Compressive Strength Prediction for Industrial Waste-Based SCC Using Artificial Neural Network | Hossain, M A; Islam, G M S and Mallick, A | Journal of the Civil Engineering Forum, Vol. 9, No. 1, pp11-26. https://doi.org/10.22146/jcef.4094 | 2023 |
10 | Optimization of particle packing density of industrial wastes incorporated concrete | Ziad, A R and Islam, G M S | 6th International Conference on Advances in Civil Engineering (ICACE-2022) 21-23 December 2022 CUET, Chattogram, Bangladesh. Paper ID: 1574, pp. 762-770. | 2022 |
11 | Geopolymer-based building blocks using construction and demolition waste | Zubair, M; Mahmood, M H and Islam, G M S | 6th International Conference on Advances in Civil Engineering (ICACE-2022) 21-23 December 2022 CUET, Chattogram, Bangladesh. Paper ID: 1558, pp. 724-731. | 2022 |
12 | Effect of bacterial incorporation in alkali-activated concrete | Tamim, M; Abhra, A R; Islam, M M and Islam, G M S | 6th International Conference on Advances in Civil Engineering (ICACE-2022) 21-23 December 2022 CUET, Chattogram, Bangladesh. Paper ID: 1552, pp. 716-723. | 2022 |
13 | Ionizing radiation shielding efficacy of common mortar and concrete used in Bangladeshi dwellings | N Jaha, G M S Islam, M F Kabir, M U Khandaker, F Z Chowdhury, A K M S I Bhuian | Case Studies in Construction Materials Volume 17, December 2022, e01547, https://doi.org/10.1016/j.cscm.2022.e01547 | 2022 |
14 | Performance of Ladle Furnace Slag in Mortar under Standard and Accelerated Curing | Iffat Sultana and G M Sadiqul Islam | Advances in Civil Engineering, Special Issue: Towards Carbon Neutrality in Civil Engineering, Volume 2022, Article ID 7824084, https://doi.org/10.1155/2022/7824084 | 2022 |
15 | Ternary combined industrial wastes for non-fired brick | G. M. Sadiqul Islam, Ali A. Shubbar, Sudipta Sarker, Monower Sadique | Australian Journal of Structural Engineering, Vol. 23, No. 2, pp163-176 https://doi.org/10.1080/13287982.2022.2038406 | 2022 |
16 | Sustainable high-performance, self-compacting concrete using ladle slag | G. M. Sadiqul Islam, Suraiya Akter, Tabassum Binte Reza | Cleaner Engineering and Technology, Volume 7, April 2022 https://doi.org/10.1016/j.clet.2022.100439 | 2022 |
17 | Slag and silica fume based geopolymer mortar using locally available waste filler materials (Best Paper Award in Structural Engineering) | Nasimuzzaman, M. S. Ayon and G. M. S. Islam | Advances in Civil Engineering (Selected Proceedings of ICACE 2020), Lecture Notes in Civil Engineering book series (LNCE), Volume 84, pp. 235-46, SpringerLink, https://doi.org/10.1007/978-981-16-5547-0_17 | 2022 |
18 | Early age and long-term mechanical performance of mortars incorporating high volume GGBS | A.A. Shubbar, M.S. Nasr, G.M.S. Islam, Z.S. Al-Khafaji, M. Sadique, K. Hashim & L.N. Assi | Advances in Civil Engineering (Selected Proceedings of ICACE 2020), Lecture Notes in Civil Engineering book series (LNCE), Volume 84, pp. 267-74, SpringerLink, https://doi.org/10.1007/978-981-16-5547-0_26 | 2022 |
19 | Ternary combination of industrial wastes for sustainable geopolymer mortars | T. Faria, J. Ferdous & G.M.S. Islam | Advances in Civil Engineering (Selected Proceedings of ICACE 2020), Lecture Notes in Civil Engineering book series (LNCE), Volume 84, pp. 177-88, SpringerLink, https://doi.org/10.1007/978-981-16-5547-0_18 | 2022 |
20 | Effect of Compaction Pressur on the Properties of Eco-friendly Building Block Produced from Industrial By-products | Ezaz Ahmed, Syed Maruf-Ul Hassan & G. M. Sadiqul Islam | Advances in Civil Engineering (Selected Proceedings of ICACE 2020), Lecture Notes in Civil Engineering book series (LNCE), Volume 84, pp. 189-98, SpringerLink, https://doi.org/10.1007/978-981-16-5547-0_19 | 2022 |
21 | Influence of activator and superplasticizer on fly ash based geopolymer paste and mortar | S. M. S. Sifat, E. Kabir & G. M. S. Islam | Advances in Civil Engineering (Selected Proceedings of ICACE 2020), Lecture Notes in Civil Engineering book series (LNCE), Volume 84, pp. 235-46, SpringerLink, https://doi.org/10.1007/978-981-16-5547-0_23 | 2022 |
22 | Injection-molded natural fiber-reinforced polymer composites–a review | MS Rabbi, Tansirul Islam, GM Sadiqul Islam | International Journal of Mechanical and Materials Engineering, Vol. 16, 15(2021), https://doi.org/10.1186/s40712-021-00139-1) | 2021 |
23 | Bond Strength of Epoxy-Coated Reinforcement in Concrete | Anik Naha, G. M. Sadiqul Islam, Md. Ariful Islam Chowdhury | International Conference on Planning, Architecture & Civil Engineering, 09 - 11 September 2021, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh. Paper ID: CE-066, pp. 120-25. | 2021 |
24 | U-shaped ferrocement wrapping with inter-surface locking for flexural strengthening of RC beam | G. M. Sadiqul Islam, Md. Naimul Haque, Md. Rabiul Alam, Safwatul Haque Niloy & Md. Mamun Islam | Australian Journal of Structural Engineering (Taylor and Fancis), Vol 21, No. 2, pp. 143-153. DOI: https://doi.org/10.1080/13287982.2020.1718416 | 2020 |
25 | Evaluating compressive strength of roller compacted concrete (RCC) using steel slag (SS) aggregate | M. T. Raihan, G. M. S. Islam & F. H. Chowdhury | IABSE-JSCE Joint Conference on Advances in Bridge Engineering-IV, August 26-27, 2020, Dhaka, Bangladesh, pp. 359-363. ISBN: 978-984-34-8313-3,www.iabse-bd.org | 2020 |
26 | Non-Fired Building Block Using Industrial Wastes (Best Paper Award in Structural Engineering) | Sudipta Sarker, G. M. Sadiqul Islam, Monower Sadique and Ali Abdulhussein Shubbar | 5th International Conference on Civil Engineering for Sustainable Development (ICCESD 2020), 7-9 February 2020, KUET, Khulna, Bangladesh, Paper ID: STE-5235. | 2020 |
27 | Strength Properties of Recycled Pumice Concrete | G. M. Sadiqul Islam, S. Das & M. K. H. Sabbir | 2nd International Conference on Research & Innovation in Civil Engineering (ICRICE 2020), 10-11 January 2020, Paper ID: 174 | 2020 |
28 | Durable Concrete Design Guidelines for Bangladesh using Chloride Mapping | Islam G M S, Chowdhury F H, Rahman M R and Raton M | ASCE-International Conference on Sustainable Infrastructure, 6-9 Nov, 2019, Los Angeles, California, USA. pp. 482-93. www.asce.org/publications | ascelibrary.org | 2019 |
29 | Bond Strength of Fusion Bonded Epoxy-Coated Reinforcement in Concrete | G. M. Sadiqul Islam, Ehsan Ahmed, Md. Sabbir Hossain and S. M. Sharif Uddin | Journal of the Civil Engineering Forum, Vol. 5, No. 3 DOI:https://doi.org/10.22146/jcef.47532 | 2019 |
30 | Efect of retarding superplasticizers on the properties of cement paste, mortar and concrete | G. M. Sadiqul Islam, Muhammad Tanveer Raihan, Md. Mehedi Hasan, Md. Rashadin | Asian Journal of Civil Engineering, Volume 20, Issue 4, pp 591–601. DOI:https://doi.org/10.1007/s42107-019-00128-y | 2019 |
31 | Flexural capacity assessment of Brick aggregated pre-cracked RC beam strengthened with carbon fiber polymar | Niaz Md Mamun, G. M. Sadiqul Islam, Md Jahangir Alam | Malaysian Journal of Civil Engineering, Vol. 31, No. 1, pp. 1-8. DOI:https://doi.org/10.11113/mjce.v31.15838 | 2019 |
32 | Mechanical and Shrinkage Properties of Polypropylene Fiber Reinforced Concrete with Brick Chips | Islam G M S, Uddin M I and Hasan M F | International Conference on Structural Engineering Research (iCSER-2019), 19-23 January, 2019, Dhaka, Bangladesh. ISBN: 978-0-6482681-2-3 www.icser.net.au/proceedings/2019/Proceedings_iCSER2019.pdf | 2019 |
33 | Properties of Self-Compacting Concrete Using Fly Ash and Polypropylene Fibre | Intezar,T M, Haque S, Islam, G M S, Roy S and Mushfiq M | International Conference on Engineering Research and Education, 25-27 January 2019, School of Applied sciences & Technology, SUST, Bangladesh. pp. 661-66. | 2019 |
34 | Use of Jute Fiber to Improve Concrete Properties Against Fire | Anjum N, Akter N and Islam G M S | 4th International Conference on Advances in Civil Engineering 2018 (ICACE 2018), CUET, Bangladesh. pp SE 658-63. http://103.99.128.10:8080/xmlui/handle/123456789/205 | 2018 |
35 | Pre-cracked RC Beam Strengthening with CFRP Materials | Islam G M S, Chowdhury F H, Dev A and Ismawi | 7th Brunei International Conference on Engineering and Technology 12-14 November, 2018, Universiti Teknologi Brunei, Brunei Darussalam. https://digital-library.theiet.org/content/conferences/10.1049/cp.2018.1606 ISBN: 978-1-83953-002-9 | 2018 |
36 | Applicability of Treated Industrial Wastewater in Concrete Industry | Sultana I and Islam G M S | 1st International Conference on Research and Innovation in Civil Engineering (ICRICE 2018), Southern University Bangladesh (SUB), Bangladesh. | 2018 |
37 | Properties of Cement and Sand used for Construction in Chittagong Region | Uddin M N and Islam G M S | 1st International Conference on Research and Innovation in Civil Engineering (ICRICE 2018), Southern University Bangladesh (SUB), Bangladesh. | 2018 |
38 | Waste glass powder as partial replacement of cement for sustainable concrete practice | Islam G M S, Rahman M H and Kazi N | International Journal of Sustainable Built Environment, Vol. 6 No. 1, pp. 37-44. https://doi.org/10.1016/j.ijsbe.2016.10.005 | 2017 |
39 | Effect of Phosphogypsum on the Properties of Portland Cement | Islam G M S, Chowdhury F H, Raihan M T, Amit S K S and Islam M R | Procedia Engineering, Vol. 171, pp. 744-751. https://doi.org/10.1016/j.proeng.2017.01.440 | 2017 |
40 | Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete | Islam G M S and Gupta S D | International Journal of Sustainable Built Environment, Vol. 5, No. 2, pp. 345-354. https://doi.org/10.1016/j.ijsbe.2016.05.007 | 2016 |
41 | Construction Waste Management Practice: Bangladesh Perspective | Chowdhury F H, Raihan M T, Islam G M S & Ramiz F | 3rd International Conference on Advances in Civil Engineering, CUET, Bangladesh. | 2016 |
42 | Influence of Portland cement characteristics on air-entrainment in fly ash concrete | McCarthy M J, Strompinis N, Csetenyi L J and Islam G M S | Magazine of Concrete Research, Vol. 67, No. 14, pp. 786-797. https://doi.org/10.1680/macr.14.00279 | 2015 |
43 | Application of different structural health monitoring system on bridges: An overview | Chowdhury F H, Raihan M T and Islam G M S | IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III Towards Owning a Resilient Infrastructure | 2015 |
44 | Mechanical properties and shrinkage of polypropylene fiber concrete | Akter B and Islam G M S | International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD-2015), Department of Civil Engineering, Dhaka University of Engineering & Technology (DUET), Bangladesh, Paper ID: CBM-004, pp. 16-21. | 2015 |
45 | Potential Use of Phosphogypsum for Sustainable Concrete Construction | Islam G M S, Amit S K S and Islam M R | National Conference on Earthquake and Natural Disaster, 1st NCEED 2015, Chittagong University of Engineering & Technology (CUET), Bangladesh, | 2015 |
46 | Self-compacting concrete using Barapukuria fly ash | Islam G M S, Arif S and Kabir F | 2nd International Conference on Civil Engineering for Sustainable Development (ICCESD-2014), Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, ISBN: 978-984-33-6373-2 (CD-ROM), pp. 833-838. | 2014 |
47 | Transfloor slab system-A convenient approach of RC construction | Debanath O C and Islam G M S | 2nd International Conference on Advances in Civil Engineering (ICACE 2014), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Chittagong, Bangladesh, pp. 399-404. | 2014 |
48 | Potential of recycled glass as cementitious material in concrete | Rahman M H, Shames A A and Islam G M S | 2nd International Conference on Advances in Civil Engineering (ICACE 2014), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Bangladesh, pp. 722-727. | 2014 |
49 | Prospects of porous concrete in civil engineering applications | Zaman M F and Islam G M S | 2nd International Conference on Advances in Civil Engineering (ICACE 2014), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Bangladesh, pp. 728-734. | 2014 |
50 | Durability of structural concrete in acidic environment – A review | Islam S, Alam M R and Islam G M S | 2nd International Conference on Advances in Civil Engineering (ICACE 2014), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Chittagong, Bangladesh, pp. 692-700. | 2014 |
51 | Application of FRP materials for strengthening of RC structural members | Chowdhury F H and Islam G M S | 2nd International Conference on Advances in Civil Engineering (ICACE 2014), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Bangladesh, pp. 449-454. | 2014 |
52 | Evaluating test methods for rapidly assessing fly ash reactivity for use in concrete | McCarthy M J, Islam G M S, Csetenyi L J and Jones M R | World of Coal Ash Conference (WOCA), American Coal Ash Association (ACAA) and the University of Kentucky Center for Applied Energy Research (CAER), Lexington, Kentucky, KY, USA, Paper ID: 095, Available online at www.flyash.info | 2013 |
53 | Solid waste (co-)combustion in power generation for sustainable waste management | Islam G M S and Akter A | 3rd International Conference on Solid Waste Management in Developing Countries (WasteSafe 2013), Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, Paper ID: 74, ISBN: 978-984-33-7045-7. | 2013 |
54 | Cost effective treatment for textile wastewater | Akter A Islam G M S, Hossain S, and Haque M | 3rd International Conference on Solid Waste Management in Developing Countries (WasteSafe 2013), Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, Paper ID: 76, ISBN: 978-984-33-7045-7. | 2013 |
55 | Building energy: Bangladesh perspective | Asif M S H and Islam G M S | International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013), CUET, Chittagong, Bangladesh. | 2013 |
56 | Refining the foam index test for use with air entrained fly ash concrete | McCarthy M J, Islam G M S, Csetenyi L J and Jones M R | Magazine of Concrete Research, Vol. 64, No. 11, pp. 967-978 https://doi.org/10.1680/macr.11.00152 | 2012 |
57 | Colorimetric evaluation of admixture adsorption by fly ash for use in air-entrained concrete | McCarthy M J, Islam G M S, Csetenyi L J and Jones M R | Materials and Structures, Vol. 45, No. 12, pp. 1793-1803. https://doi.org/10.1617/s11527-012-9870-x | 2012 |
58 | Investigating Techniques for Evaluating Fly Ash Behaviour in Air-entrained Concrete | Islam G M S, McCarthy M J, Csetenyi L J and Jones M R | EUROCOALASH 2012 Conference, Aristotle University of Thessaloniki, Department of Civil Engineering, Thessaloniki, Greece, Available online at: www.evipar.org, www.eurocoalash.org. | 2012 |
59 | Rice husk ash as a sustainable construction material for Bangladesh | Islam G M S and Akter A | 1st International Conference on Advances in Civil Engineering (ICACE 2012), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Chittagong, Bangladesh, Paper ID: ASEE 057. | 2012 |
60 | Possibility of improved riverbank protections in Bangladesh | Akter A and Islam G M S | 1st National Seminar on Climate Change Impact and Adaptation (CCIA 2012), Center for Climate Change and Sustainability Research (3CSR), DUET, Gazipur, Bangladesh, pp. 250-258. | 2012 |
61 | Hydrodynamic Performance study of geobags in Revetment | Akter A, Islam G M S and Hoque S | 1st International Conference on Advances in Civil Engineering (ICACE 2012), Department of Civil Engineering, Chittagong University of Engineering & Technology (CUET), Bangladesh, Paper ID: WRM 029. | 2012 |
62 | Green Construction Materials – Bangladesh Perspective | Islam G M S, Islam M M, Akter A and Islam M S | International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), CUET, Bangladesh. | 2011 |
63 | Determination of Corrosion Initiation of Rebars in Concrete by Monitoring Half-Cell Potential | Islam G M S and Sugiyama T | Malaysian Journal of Civil Engineering, Vol. 22, No. 2, pp. 186-201 | 2010 |
64 | Investigation of threshold chloride concentration of steel in concrete using an embedded lead electrode | J Furumura, GMS Islam, T Sugiyama | Proceedings of 2nd International Conference on Durability of Concrete Structures. Hokkaido University Press, Sapporo, Japan, pp. 353-60. | 2010 |
65 | Corrosion Monitoring of Rebars in Concrete under Accelerated Chloride Environment | Islam G M S and Sugiyama T | Fourth International Conference on Construction Materials, Performance, Innovations and Structural Implications (ConMat’09), Nagoya, Japan, ISBN: 978-0-415-59316-8, Vol. 1, pp. 255 -262. | 2009 |