PROFILE DETAILS
rabbi@cuet.ac.bd
Md. Sanaul Rabbi was born in Rangpur city, Bangladesh, in 1985. He received the B.Sc. and M.Sc. degrees in Mechanical engineering from the Chittagong University of Engineering and Technology, Chattogram, in 2008 and 2013 respectively. He has done the Ph.D. degree in NDT from Saga University, Japan, in 2018. From 2017 to 2018, Mr. Rabbi was a visiting researcher with the "Ulterasonic Laboratory". Since 2008, he has been a faculty member with the Mechanical Engineering Department, Chittagong University of Engineering and Technology. His research interests include non-destructive evaluation & testing, composite materials, structural health monitoring, control engineering, industrial automation, production & operations management.
Composite Materials, Non-Destructive Technique & Evaluation , Structural Health Monitoring, Computational Analysis, Mechatronics, Industrial Automation, Operations Management.
Ph.D. (Saga University); M.Sc. (CUET); B.Sc. (Mechanical, CUET)
Serial No | Title | Authors | Informations | Year |
---|---|---|---|---|
1 | A Review on Developments in Manufacturing Process and Mechanical Properties of Natural Fiber Composites | Md. Maruf Billah, M S Rabbi, Afnan Hasan | Journal of Engineering Advancements | 2021 |
2 | Investigation of Production Line Defects Using Root Cause Analysis: A Case Study on an Automobile Industry in Bangladesh | P S Roy, M S Rabbi, S C Banik and M M Rahman | International Journal of Management | 2021 |
3 | Analytical Study on the Angular Dependency of A0-mode Lamb Wave in Transversely Isotropic Material | M S Rabbi, K Teramoto, and H. Ishibashi | International Journal of Advanced Research in Physics | 2021 |
4 | Investigation of Production Line Defects Using Root Cause Analysis: A Case Study on an Automobile Industry in Bangladesh | Investigation of Production Line Defects Using Root Cause Analysis: A Case Study on an Automobile Industry in Bangladesh | International Journal of Management, Vol. 12, No. 2, pp. 713-719 | 2021 |
5 | A Computational Study on the Aerodynamic Performance of Modified Savonius Wind Turbine | M H Pranta, M S Rabbi, and M M Roshid | Results in Engineering, p. 100237 | 2021 |
6 | A Computational Study on Structural and Thermal Behavior of Modified Disk Brake Rotors | M H Pranta, M S Rabbi, S C Banik, M G Hafez, Y M Chu | Alexandria Engineering Journal | 2021 |
7 | Mathematical Simulation of New Vehicle Suspension System With High Negative Stiffness System for Lower Natural Frequency | Md. Arafat Rahman, S U Chowdhury, M S Rabbi, M S Khan | Mechanical Engineering Research Journal (MERJ) | 2010 |
8 | Implementation of Alcohol Produced from Sugarcane in Internal Combustion Engine | R. A. Chy., M S Rabbi, J. U. Ahmmed | 1st International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2011 |
9 | Development of a Position Monitoring System for Patients | Md. Kamrul Hasan, S. C. Banik and M S Rabbi | Mechanical Engineering Research Journal (MERJ) | 2012 |
10 | Development of a Smart Home by Voice Control | K. T. Rasul, M S Rabbi and S. C. Banik | Mechanical Engineering Research Journal (MERJ) | 2012 |
11 | Design and Fabrication of a Cost Effective Cyclone Separator | N. Nahar, M.A. Wazed. M S Rabbi and M. K. Islam | 5th BSME International conference on Thermal Engineering | 2012 |
12 | Bio-Gas from Anaerobic Digestion of Chicken Excreta | M S Rabbi, B. Salam and S. Biswas | National Conference on Physics for Technology Development | 2012 |
13 | Development of a Prototype CNC Router | M S Rabbi, S. C. Banik and M. T. Islam | International Journal of Mechanical Engineering (IJME) | 2013 |
14 | Design and Fabrication of GSM Based Automatic Irrigation System | M Biswas, M A Wazed, M S Rabbi | 2nd International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2013 |
15 | Design and Fabrication of Model Size Remote Controlled Hovercraft | S Chowdhury, M S Rabbi, S C Banik | 2nd International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2013 |
16 | Detection of Sub-surface Delamination based on the Spatio-temporal Gradient Analysis over the A0-mode Lamb wave Fields | K. Teramoto, M S Rabbi, Md. T. I. Khan | International Congress on Ultrasonics (ICU) | 2015 |
17 | Experimental Investigation of Thermo Electric Power using Candlelight | D. Sarker, M S Rabbi, J U Ahamed, A Razzaq | 3rd International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2015 |
18 | Time reversal analysis for damage detection in the dispersive media under PDE constraints | K. Teramoto, M S Rabbi | International Symposium on Applied Electromagnetics And Mechanics (ISEM) | 2015 |
19 | Image Reconstruction of Corrosion under Coating Film by Dynamic Shear Strain Analysis of Lamb Waves | M S Rabbi, K. Teramoto | 19th World Conference on Non-Destructive Testing (WCNDT) | 2016 |
20 | Effect of fibre direction on directivity pattern of A0 mode Lamb wave scattered at through-hole damage region in unidirectional laminates: A computational study | M Mostaqur Rahman, A. B. M. Toufique Hasan, M S Rabbi | AIP Conference Proceedings | 2017 |
21 | Image Reconstruction of Subsurface Damage in Unidirectional Fiber Composite Laminate by Dynamic Shear Strain Analysis of Lamb wave-a Numerical Approach | M S Rabbi, K. Teramoto, and Md. T. I. Khan | International Journal of COMADEM | 2018 |
22 | Noise Reduction of Helicopter Rotor Blades by Using Spoiler | M T Islam, M S Rabbi, M S Uddin M | 8th BSME International Conference on Thermal Engineering (ICTE) | 2018 |
23 | Stress analysis of welded joint portions at rear-side footrests of public transportation like human hauler | M Asheful Alam, M S Rabbi, Sama E Shan, Md Shamim Hasan | 5th International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE) | 2018 |
24 | Effect of fibre direction on directivity pattern of A0 mode Lamb wave scattered at through-hole damage region in unidirectional laminates: A computational study | M S Rabbi, K. Teramoto, M Hasan | 4th International Conference on Advances in Civil Engineering (ICACE) | 2018 |
25 | Analytical and computational study on imaging of through-thickness cylindrical edge in plate-like quasi-isotropic composite laminates using A0-mode Lamb wave | M S Rabbi, K. Teramoto, and Md. T. I. Khan | International Journal of COMADEM | 2019 |
26 | A0-mode Lamb wave based detection of corrosion under coating film in plate-like metallic structures; analytical, finite element and experimental studies | M S Rabbi, and K Teramoto | GUB Journal of Science and Engineering | 2019 |
27 | Computational study of the Lamb wave dispersion curve in steel plate | Md. Mazharul Islam, M S Rabbi, Md. Eftaykharul Islam | 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2019 |
28 | Performance comparison of moisture removal in direct solar dryers | Chowdhury Md. Adib Zawad, M S Rabbi | 5th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2019 |
29 | Use of Root Cause Analysis in Improvement of Product Quality and Productivity in Pragoti Industries Ltd | P S Roy, M S Rabbi | 4th International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) | 2019 |
30 | Combined Effect of Winglet and Trailing Edge Serrations on Performance of Aircraft Wings: Computational and Experimental Study | M S Rabbi, Faisal Ahmed | International Journal of Advanced Science and Engineering (IJAST), Vol. 29, No. 11, pp. 619-624 | 2020 |
31 | Jute fiber-reinforced polymer composites: A comprehensive review | M S Rabbi, Tansirul Islam, and M M K Bhuiya | International Journal of Mechanical and Production Engineering Research and Development, Vol.10, No. 3, pp. 3053-3072 | 2020 |
32 | A Numerical Study on Interaction of A0-mode Lamb Wave with Cylindrical Hole in CFRP Composite Laminates | M S Rabbi, K Teramoto, T I Khan | 6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) | 2020 |