PROFILE DETAILS
ratan.kumar@cuet.ac.bd
Ratan Kumar Das was born in Chittagong, Bangladesh, the Son of Lalit Mohan Das and Mamota Rani Das. He is currently working as an assistant professor in the department of mechanical engineering at Chittagong University of Engineering and Technology(CUET). After completing Higher Secondary at Nizampur College, Bangladesh, he entered the Chittagong University of Engineering and Technology in 2007. He received the degree of Bachelor of Science in Mechanical Engineering in August 2011 and stood first in order of merit. He was awarded a technical scholarship for academic excellence by the Government of the Peoples Republic of Bangladesh during under graduation programs. In the spring of 2012, he was awarded a Republic of Korea's Government scholarship. He entered the graduate school of the Institute of E-Vehicle Technology, University of Ulsan, Republic of Korea. After completing a Master’s of Science in e-vehicle design technology Ratan Kumar Das joined as a full-time faculty member in the Mechanical Engineering Department of the College of Engineering and Technology (CEAT), IUBAT-International University of Business Agriculture and Technology in the year 2014. Before joining here he worked as a full-time research assistant (February 2012 to February 2014) in the Applied Aerodynamics Research Laboratory, at the University of Ulsan, Republic of Korea. He worked on a project " Modelling of oil pipeline behaviour using Computational Fluid Dynamics(CFD) approach" as a research assistant at the Memorial University of Newfoundland, Canada from September 01, 2021, to May 07, 2022. He served as a teaching assistant(TA) in Fundamentals of Fluid Dynamics and Chemistry and Physics of Engineering Materials under the Faculty of Engineering & Applied Science, Memorial University of Newfoundland. Mr Das also worked as an Executive Assistant for the Teaching Assistant Union of Memorial University of Newfoundland(TAUMUN). He has been researching fluid dynamics, Thermo-fluids, Numerical Analysis of structure using FEM, Automotive Engineering, Fluid-Structure interaction, Vortex-Induced Vibration(VIV), Energy harvesting, microplasma, and their application in engineering fields such as microplasma-based fuel reforming, surface modification, gas treatment, etc. He is a regular reviewer of several international journals including Physics of Plasmas. He also has computer skills in the software of Microsoft Office, AutoCAD, Catia, Matlab, Abaqus FEM, LS DYNA, ANSYS CFD, Comsol Multiphysics, and VizGlow (Commercial Software for the computational analysis of plasma-related problems), etc. He loves teaching as well as research. He joined CUET to develop the field of Mechanical Engineering education and research in the country. At present, he is on study leave to pursue his Ph.D. in Mechanical, Manufacturing, and Mechatronic Engineering from RMIT University, Australia. He is working on a sustainable water desalination system using low-grade thermal energy, a Vacuum Membrane Desalination (VMD) system, Performance analysis of Eductor.
Numerical Simulation, Fluid dynamics, CFD, FEM, Automotive Engineering, Thermo-Fluids, Renewable Energy, Microplasma.
B.Sc Engg. (Mechanical, CUET),M.Sc Engg. (E-Vehicle Tech., UOU, South Korea), Ph.D. (RMIT University, Australia, Ongoing), MIEB, MBSME.
TEACHING AFFILIATIONS
Engineering Mechanics, Engineering Materials, Solid and Structural Mechanics, Fluid Mechanics, Thermodynamics, Refrigeration and Air Conditioning, Production Process, Internal Combustion Engines, Industrial Management, Mechanical Drawing and CAD, Machine Tools, MATLABProfessional Experience
Duration |
Position |
September 2021-April 2022 |
Research Assistant, Faculty of Engineering
& Applied Science, Memorial University of Newfoundland, Canada |
December 2016-Present |
Assistant Professor, Department of Mechanical Engineering, Chittagong University of
Engineering & Technology, Bangladesh
|
May 2015-December 2016 |
Lecturer, Department of Mechanical Engineering,
Chittagong University of Engineering &
Technology, Bangladesh
|
September 2014-May 2015 |
Lecturer, Department of Mechanical Engineering, International
University of Business,
Agriculture & Technology, Bangladesh
|
March 2012-Feb 2014 |
Research Assistant, University of Ulsan, Republic of Korea |
January 2017-Present |
Adjunct Faculty Member, Bangladesh Military Academy |
May 2015- Present |
Consultant, BRTC (Bureau of Research, Testing and
Consultation), Department of
Mechanical Engineering, CUET
|
July 2019-Present |
Adjunct Faculty Member, Bangladesh Naval Academy |
Serial No | Title | Authors | Informations | Year |
---|---|---|---|---|
1 | Simultaneous Simulation of Micro hollow Cathode Discharge (MHCD) and Its Sustained Discharge (MCSD) with Splits Third Electrodes | Ratan Kumar Das and Jichul Shin | Physics of Plasmas 23, 113506 | 2016 |
2 | Bimetallic Corrosion Failure of a Ladder Chassis Frame Exposed to Humid Environment and the Justification of Cathodic Protection Methods by Numerical Analysis | Shubhasish Chowdhury and Ratan Kumar Das | Mechanical Engineering Research Journal, Volume11, PP.77-85 | 2017 |
3 | Numerical Analysis on Properties of Larger Volume Microdischarge Generated in an Experimental Investigation for Microplasma Reactor | Ratan Kumar Das and Shin Jichul | Mechanical Engineering Research Journal, Volume10, P P . 5 7- 6 5 | 2016 |
4 | Performance Enhancement of an Automobile Radiator | Ratan Kumar Das, Bijoy Mallick, Sajal Chandra Banik, MD. Fahel Bin Noor and Ahsan Habib | Journal of Automation and Automobile Engineering, Volume 5, Issue 2,PP24-32 | 2020 |
5 | Determination of the Factors Increasing Propulsive Efficiency of a Quad Copter Propeller | Ratan Kumar Das and Kazi Anisur Rahman | Mechanical Engineering Research Journal, Volume12(under review) | 2021 |
6 | Design and Analysis of a Vortex Induced Vibration Based Oscillating Free Stream Energy Converter | R. K. Das and M. T. Galib | Journal of Engineering Advancements, Vol. 2 No. 02 (2021) (DOI: https://doi.org/10.38032/jea.2021.02.007 ) | 2021 |
7 | An Experimental and Simulation Study of Larger Volume Micro discharge for the Realization of Microplama Based Reactor Applicable to Fuel Reforming and Material Processing | Ratan Kumar Das and A.Z.A. Saifullah | 5th International Conference on Mechanical, Industrial and Energy Engineering, 26-27 December, 2018, Khulna, Bangladesh | 2018 |
8 | Performance Comparison of different Winglets by CFD | Chowdhury Abid Mahmood and Ratan Kumar Das | AIP Conference Proceedings(https://aip.scitation.org/doi/10.1063/1.5115907) | 2018 |
9 | An Experimental Study of Generating Larger Volume Micro-Discharges and Prediction of its Probable Engineering Application | Ratan Kumar Das and A. Z. A. Saifullah | 3rd International Conference on Mechanical Engineering and Renewable Energy,26–29 November, PI-002, PP.26-29, 2015, Chittagong, Bangladesh. | 2015 |
10 | A Simulation Studies of DC Microhollow Cathode Sustained Discharge and Comparison with Experimental Investigation | Ratan Kumar Das and Bably Das | IEEE(https://ieeexplore.ieee.org/document/6991176) | 2015 |
11 | A Study of the Sound Quality Analysis of Lever Noise of a Vehicle | Bably Das and Ratan Kumar Das | The 9th International Forum on Strategic Technology (IFOST), S4-p72, 2014, Bangladesh. | 2014 |
12 | Numerical Studies of Microcathode Sustained Discharge for General Engineering Application | R. K. Das, Umme Mumtahina and A. S. M Sayem | 2nd International Conference on Mechanical Engineering and Renewable Energy, PI-246, PP.120, 2013. | 2013 |
13 | Problem Diagnosis of Heat Engine: A Case Study of a Petrol Engine of Heat Engine Lab at CUET | Ratan Kumar Das and S.K. Biswas | 1st International Conference on Mechanical Engineering and Renewable Energy, PI-142, PP.120, 2011. | 2011 |
14 | A Finite Element Analysis on Fatigue Failure of a Ladder Chassis Frame Due to Welding Residual Stress and the Techniques to Control it | Shubhasish Chowdhury and Ratan Kumar Das | 4th International Conference on Mechanical Engineering and Renewable Energy,PI-406, 2017,Chittagong, Bangladesh. | 2017 |
15 | Enhancement of Convection Heat Transfer Rate Using Nano Fluid (Al2O3) | M. R. Pramanik and Ratan Kumar Das | 4th International Conference on Mechanical Engineering and Renewable Energy,PI-407, 2017,Chittagong, Bangladesh. | 2017 |
16 | Design and fabrication of a 3d printed myoelectric prosthetic arm | Arif Mahmud Sikder, Ratan Kumar Das and Unamanaa Nileen Dewanjee | Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019-PI-203),11–13 December, 2019, Chittagong, Bangladesh. | 2019 |
17 | Enhancement of Heat Transfer Using ZnO-Water Nanofluid in a Shell and Tube Heat Exchanger | Jahid Al Nur, Ratan Kumar Das, Uschuas Dipta Das and Md. Kawsar Sajib | Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019-PI-198),11–13 December, 2019, Chittagong, Bangladesh. | 2019 |
18 | Design and Fabrication of a 360 Degree Rotating Smart Table Fan with IoT Based Control System | Mohammad Saiful Islam and Ratan Kumar Das | 6th International Conference on Mechanical Engineering and Renewable Energy | 2021 |